Until we have a built-in preset system, I thought this might be useful:
It’s a simple 4 channel sequencer intended to be used as a bank of presets. You connect each channel’s output to a control you wish to vary and set the knob appropriately for each step. To use a channel as a gate simply set the knob to 0 or 1. The unit can be stepped by using the trigger or by applying a pulse to the stp input. The reset trigger/input resets to step 1. I provided an output for the step and reset so that multiple units could be chained if desired ( see patch). By assigning a MIDI note to the triggers you can step it using an external controller.
preset bank V1.0.audulus (57.2 KB)
2 Likes